Home

how to clean a auto radiator?

Oct 01, 2006 by ronnie b | Posted in Other - Cars & Transportation

i had a blown gasket and oil had gotten in the radiator and now the water is not circulating. i have even removed the therostat.

If you have the thermostat out, and ther is still no circulation, you have another problem, like perhaps a failed water pump, that allowed the engine to get so hot that you blew a head gasket.
With the radiator cap off, and the engine idling, look

Bay Area Alouis Auto Radiator & Air Conditioning

Radiator red hot? AC shot? Alouis Auto Radiator & Air Conditioning in San Francisco specializes in the repair of heating, cooling and air ...

Air Conditioning Trouble Shooting solve – the problem now!

Image : http://www.flickr.com

If the air conditioner malfunctions, air conditioning troubleshooting is, you should consider what it costs. The first thing you must ensure that the thermometer at temperatures below room temperature. The switch should be turned to cold. "If you can plan a thermostat, make sure it has fresh batteries.

The next thing troubleshooting air conditioner is toCheck the power of the 'fan switch to' on 'from' Auto '. If nothing happens, which means that the plant is burned or been disconnected. But if the fan runs, then it means that the power is there. If the radiator system is used to create heat, to confirm whether the emergency button is activated.

Seek knowledge of the electrical distribution system or a backup, after the switch track or safety. Solve the problem once. WhenSame problem, please call a professional.

When troubleshooting, air conditioning, if the fan switch is the "self" and "cold", turn the thermostat lower than the actual temperature. If this fails, but fan works, control the distribution of wiring. The problem may be with this when the power switch is functioning properly.

Some of them may have reduced pressure on the floor. This is a key lockblock outside the government, generally in line cooler. printing conditions as long as possible, within it. Is it the right, but there is no cooling, test the line's largest copper in the condenser.

The line of hot copper suggests that the compressor is rejected or the system does not work. On the other hand, is a fresh line of copper, there is some sort of problem with the distribution of air within a block filters and others. Less pressureFreon also lead to freezing. Stop and melt completely. If the problem by leaving the air conditioning stops again, find a specialist.

Source: Air conditioners Best Brands